Agilent Technologies Signal Analyzer N9030a - Manual (Page 77)

3 Programming the Analyzer
List of Supported SCPI Commands
C
:CALCulate:BWIDth|BANDwidth:NDB "N dB Points " on page 829
:CALCulate:BWIDth|BANDwidth:RESult? "N dB Points " on page 829
:CALCulate:BWIDth|BANDwidth[:STATe] "N dB Points " on page 829
:CALCulate:CLIMits:FAIL? "Limit Test Current Results (Remote Command Only)" on page 115
:CALCulate:DATA{0:50}? "Data Query (Remote Command Only)" on page 116
:CALCulate:DATA{0:50}:COMPress? "Calculate/Compress Trace Data Query (Remote Command Only)" on
page 116
:CALCulate:DATA{0:50}:PEAKs? "Calculate Peaks of Trace Data (Remote Command Only)" on page 122
:CALCulate:LIMit{1:6}:CLEar "Limit Clear (Remote Command Only, SCPI standard conformance)" on
page 828
:CALCulate:LIMit{1:6}:CONTrol[:DATA] "Limit Line Control (Remote Command Only, SCPI standard conformance)
" on page 825
:CALCulate:LIMit{1:6}:CONTrol:POINts? "Limit Line Control (Remote Command Only, SCPI standard conformance)
" on page 825
:CALCulate:LIMit{1:6}:FAIL? "Limit Fail? (Remote Command Only, SCPI standard conformance)" on
page 827
:CALCulate:LIMit{1:6}:LOWer[:DATA] "Limit Line Upper / Lower (Remote Command Only, SCPI standard
conformance)" on page 826
:CALCulate:LIMit{1:6}:LOWer:POINts? "Limit Line Upper / Lower (Remote Command Only, SCPI standard
conformance)" on page 826
:CALCulate:LIMit{1:6}:UPPer[:DATA] "Limit Line Upper / Lower (Remote Command Only, SCPI standard
conformance)" on page 826
:CALCulate:LIMit{1:6}:UPPer:POINts? "Limit Line Upper / Lower (Remote Command Only, SCPI standard
conformance)" on page 826
:CALCulate:LLINe{1:6}:ALL:DELete "Delete All Limits" on page 823
:CALCulate:LLINe
{1:6}:AMPLitude:CMODe:RELative "Relative to RL" on page 808
:CALCulate:LLINe
{1:6}:AMPLitude:INTerpolate:TYPE "Amplitude Interpolation" on page 806
:CALCulate:LLINe{1:6}:BUILd "Build from Trace" on page 818
:CALCulate:LLINe{1:6}:CMODe "Fixed / Relative Limit (Remote Command Only)" on page 828
:CALCulate:LLINe{1:6}:COMMent "Comment" on page 809
:CALCulate:LLINe{1:6}:CONTrol:DOMain "X-Axis Unit" on page 822
:CALCulate:LLINe
{1:6}:CONTrol:INTerpolate:TYPE "Frequency Interpolation" on page 805
Remote Language Compatibility Measurement Application Reference 77