Agilent Technologies Signal Analyzer N9030a - Manual (Page 1296)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
System
Example :SYST:COMM:GPIB:CONT ON Will set GPIB port to Controller
Initial S/W Revision A.02.00
SCPI LAN
Activates a menu for identifying and changing the SCPI over a LAN configuration. There are a
number of different ways to send SCPI remote commands to the instrument over LAN. It can be a
problem to have multiple users simultaneously accessing the instrument over the LAN. These keys
limit that somewhat by disabling the telnet, socket, and/or SICL capability.
Key Path System, I/O Config
Initial S/W Revision Prior to A.02.00
SCPI Telnet
Turns the SCPI LAN telnet capability On or Off allowing you to limit SCPI access over LAN
through telnet.
Key Path System, I/O Config, SCPI LAN
Mode All
Remote Command :SYSTem:COMMunicate:LAN:SCPI:TELNet:ENABle OFF|ON|0|1
:SYSTem:COMMunicate:LAN:SCPI:TELNet:ENABle?
Example :SYST:COMM:LAN:SCPI:TELN:ENAB OFF
Preset This is unaffected by Preset but is set to ON with a “Restore System Defaults->Misc”
State Saved No
Range On | Off
Initial S/W Revision Prior to A.02.00
SCPI Socket
Turns the capability of establishing Socket LAN sessions On or Off. This allows you to limit SCPI
access over LAN through socket sessions.
Key Path System, I/O Config, SCPI LAN
Mode All
1296 Remote Language Compatibility Measurement Application Reference