Agilent Technologies Signal Analyzer N9030a - Manual (Page 623)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
Input/Output
Example Set the I Ext Gain to 10 dB
CORR:IQ:I:GAIN 10
Set the I Ext Gain to –10 dB (that is, a loss of 10 dB.)
CORR:IQ:I:GAIN –10
Notes Not available unless option BBA is installed
Preset 0 dB
This is unaffected by a Preset but is set to 0 dB on a "Restore Input/Output Defaults" or
"Restore System Defaults->All"
State Saved Saved in instrument state.
Min –100 dB
Max 100 dB
Readback Text I Gain, dB
Initial S/W Revision Prior to A.02.00
Q Ext Gain
This function affects only the Q channel input and only when the Input Path is not I+jQ. It is not
available unless the Baseband I/Q option (BBA) is installed.
Key Path Input/Output, External Gain
Remote Command [:SENSe]:CORRection:IQ:Q:GAIN
[:SENSe]:CORRection:IQ:Q:GAIN?
Example Set the Q Ext Gain to 10 dB
CORR:IQ:Q:GAIN 10
Set the Q Ext Gain to –10 dB (that is, a loss of 10 dB.)
CORR:IQ:Q:GAIN –10
Notes Not available unless option BBA is installed.
Preset 0 dB
This is unaffected by a Preset but is set to 0 dB on a "Restore Input/Output Defaults" or
"Restore System Defaults->All"
State Saved Saved in instrument state.
Min –100 dB
Max 100 dB
Readback Text Q Gain, dB
Initial S/W Revision Prior to A.02.00
Remote Language Compatibility Measurement Application Reference 623