Agilent Technologies Signal Analyzer N9030a - Manual (Page 334)

5 Legacy Command Descriptions
KSi (Exchange Trace B and Trace C)
KSi (Exchange Trace B and Trace C)
Syntax
Legacy Products
8566A/B, 8568A/B
Description
Exchanges Trace B data with Trace C data.
Trace C cannot be an active trace. This means that the data in Trace C cannot be updated as the
instrument sweeps. To ensure that the current settings of the instrument are reflected in the data
exchanged between Trace B and Trace C, you must follow the four step process below.
1. Select single sweep mode ( "S2 [two] (Single Sweep)" on page 457 or "SNGLS (Single Sweep)" on
page 463 )
2. Select the desired instrument settings
3. Take one complete sweep using the command "TS (Take Sweep)" on page 497
4. Exchange the data
Format KSi
Query Data Type N/A
SCPI Equivalent Commands None
Notes The functions of KSi are identical to "BXC (Exchange Trace B and Trace C)" on page 251
and the XCH TRB,TRC form of "XCH (Exchange)" on page 509 .
334 Remote Language Compatibility Measurement Application Reference