Agilent Technologies Signal Analyzer N9030a - Manual (Page 1045)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
Save
Couplings When you select which trace to save, it makes that trace the current trace, so it displays on top
of all of the other traces.
Readback selected Trace
Status Bits/OPC
dependencies Sequential - waits for previous measurement to complete
Initial S/W Revision Prior to A.02.00
Trace File Contents
A Trace Data File contains the data for one trace.
Metadata: Trace Specific
Besides the trace data, there is metadata describing the context by which the trace was produced.
Some of the metadata is trace specific:
•
Trace Type
•
Detector
•
Trace math (function, operand1, operand2, offset, reference)
•
Trace name/number
When importing a trace, the detector and/or trace math function specified in the metadata is
imported with the trace, so that the annotation correctly shows the detector and/or math type that
was used to generate the data
Metadata: Display Specific
There is also some display-related metadata:
•
Ref Level Offset
•
External Gain
•
X-Axis Unit
•
Y-Axis Unit
Metadata: Measurement Related
The rest of the metadata is measurement specific and reflects the state of the measurement the
last time the trace was updated. These are the “measurement-related instrument settings” which,
if changed, cause a measurement restart.
•
Number of Points
Remote Language Compatibility Measurement Application Reference 1045