Agilent Technologies Signal Analyzer N9030a - Manual (Page 1202)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
Sweep/Control
Gate Delay
Controls the length of time from the time the gate condition goes True until the gate is turned on.
Key Path Sweep/Control, Gate
Remote Command [:SENSe]:SWEep:EGATe:DELay
[:SENSe]:SWEep:EGATe:DELay?
Example SWE:EGAT:DELay 500ms
SWE:EGAT:DELay?
Notes Units of time are required or no units; otherwise an invalid suffix error message will be
generated.
Preset 57.7 us
WiMAX OFDMA: 71 us
GSM/EDGE: 600 us
State Saved Saved in instrument state
Min 0.0 us
Max 100 s
Backwards
Compatibility SCPI [:SENSe]:SWEep:TIME:GATE:DELay
ESA compatibility
Initial S/W Revision Prior to A.02.00
Gate Length
Controls the length of time that the gate is on after it opens.
Key Path Sweep/Control, Gate
Remote Command [:SENSe]:SWEep:EGATe:LENGth
[:SENSe]:SWEep:EGATe:LENGth?
Example SWE:EGAT:LENG 1
SWE:EGAT:LENG?
Notes Units of time are required or no units; otherwise an invalid suffix error message will be
generated.
Dependencies Grayed out when Gate Method is set to FFT in which case the label changes to that shown
below.
1202 Remote Language Compatibility Measurement Application Reference