Agilent Technologies Signal Analyzer N9030a - Manual (Page 1443)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
View/Display
Example :DISP:VIEW ZSP sets the zone span view
Dependencies All views except NORMal require option EDP to be licensed. If the SCPI is sent to select any
other View and EDP is not licensed, an error is generated.
Preset NORMal
State Saved Saved in instrument state.
Initial S/W Revision A.07.01
Display
The Display menu is common to most measurements, and is used for configuring items on the
display. Some Display menu settings apply to all the measurements in a mode, and some only to
the current measurement. Those under the System Display Settings key apply to all measurements in
all modes.
Key Path Display
Key Path View/Display
Initial S/W Revision Prior to A.02.00
Annotation
Turns on and off various parts of the display annotation. The annotation is divided up into four
categories:
1. Meas Bar: This is the measurement bar at the top of the screen. It does not include the settings
panel or the Active Function. Turning off the Meas Bar turns off the settings panel and the
Active Function. When the Meas Bar is off, the graticule area expands to fill the area formerly
occupied by the Meas Bar.
2. Screen Annotation: this is the annotation and annunciation around the graticule, including any
annotation on lines (such as the display line, the threshold line, etc.) This does NOT include
the marker number or the N dB result. When off, the graticule expands to fill the entire graticule
area.
3. Trace annotation: these are the labels on the traces, showing their detector (or their math
mode).
4. Active Function annotation: this is the active function display in the meas bar, and all of the
active function values displayed on softkeys.
Remote Language Compatibility Measurement Application Reference 1443