Agilent Technologies Signal Analyzer N9030a - Manual (Page 265)

5 Legacy Command Descriptions
CONTS (Continuous Sweep)
CONTS (Continuous Sweep)
Syntax
Legacy Products
8560 series, 8566A/B, 8568A/B
Description
Sets the instrument to continuous sweep mode. In the continuous sweep mode, the instrument
takes its next sweep as soon as possible after the current sweep (as long as the trigger conditions
are met). A sweep may temporarily be interrupted by data entries made over the remote interface
or from the front panel.
Format CONTS
Preset: CONTS
Query Data Type N/A
SCPI Equivalent Commands :INITiate:CONTinuous 1 (see "Cont (Continuous Measurement/Sweep)" on page 563 )
Notes The functions of CONTS are identical to "S1[one] (Continuous Sweep)" on page 456 .
Remote Language Compatibility Measurement Application Reference 265