Agilent Technologies Signal Analyzer N9030a - Manual (Page 1432)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
Trigger
within the TV trigger setup functions.
Preset 17
State Saved Saved in instrument state
Min The minimum value is the minimum line, and rolls over to the maximum value. The minimum
line number depends on which Field and standard are selected.
Max The maximum value is the maximum line, and rolls over to the minimum value. The maximum
line number depends on which Field and standard are selected.
Initial S/W Revision Prior to A.02.00
Field
Accesses the menu to select the field.
Key Path Trigger, TV
Remote Command :TRIGger[:SEQuence]:TV:FMODe ENTire|ODD|EVEN
:TRIGger[:SEQuence]:TV:FMODe?
Example TRIG:TV:FMOD EVEN
Notes ODD is Field 1
EVEN is Field 2
Dependencies This command is available only when Option B7B (TV trigger) is installed.
Preset ENTire
Readback Displays the Readback value
Initial S/W Revision Prior to A.02.00
Entire Frame
When you select Entire Frame it causes the selected line number to be viewed as an offset into the
entire frame starting with line 1, the first line in Field One.
Key Path Trigger, TV, Field
Example TRIG:TV:FMOD ENT
Min 1, for all formats.
Max 525, for formats NTSC-M, NTSC-Japan, NTSC–4.43, PAL-M and PAL–60
625, for formats PAL-B, D, G, H, I, PAL-N, PAL-N Combin, and SECAM-L.
Readback Entire Frame
Initial S/W Revision Prior to A.02.00
1432 Remote Language Compatibility Measurement Application Reference