Agilent Technologies Signal Analyzer N9030a - Manual (Page 1317)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
System
Key Path System
Mode All
Notes No equivalent remote command for this key.
Initial S/W Revision A.05.01
System Remote Commands (Remote Commands Only)
The commands in this section have no front-panel key equivalent.
"System Powerdown (Remote Command Only)" on page 1317
"List installed Options (Remote Command Only)" on page 1317
"Lock the Front-panel keys (Remote Command Only)" on page 1318
"List SCPI Commands (Remote Command Only)" on page 1318
"SCPI Version Query (Remote Command Only)" on page 1319
"Date (Remote Command Only)" on page 1319
"Time (Remote Command Only)" on page 1320
Initial S/W Revision Prior to A.02.00
System Powerdown (Remote Command Only)
Remote Command SYSTem:PDOWn [NORMal|FORCe]
Notes Shuts down the instrument in the normal way (NORMal) or forced way (FORCe). In case there is
another application with modified data pending for saving, the application prompt the user. The
system waits until the user responds in the normal mode. It will go off after 20 seconds of wait in
the force mode and all data will be lost.
List installed Options (Remote Command Only)
Lists the installed options that pertain to the instrument (signal analyzer). .
Mode All
Remote Language Compatibility Measurement Application Reference 1317