Agilent Technologies Signal Analyzer N9030a - Manual (Page 852)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
Meas Setup
Off
Pressing this key, turns the demodulation function off.
Key Path Meas Setup, Analog Demod Tune&Listen
Example DEM OFF
turns the demodulation function OFF
State Saved Saved in instrument state.
Backwards
Compatibility SCPI [:SENSe]:DEMod:STATe OFF|0
Initial S/W Revision Prior to A.02.00
Demod Time
Sets the amount of time the instrument demodulates the signal after each sweep. The demodulated
signal can be heard through the speaker during demodulation. In zero span, demodulation can be
performed continuously, making this parameter not applicable, hence it is grayed out in zero
span.
Key Path Meas Setup, Analog Demod Tune&Listen
Remote Command [:SENSe]:DEMod:TIME
[:SENSe]:DEMod:TIME?
Example DEM:TIME 500 ms
DEM:TIME?
Notes This key / command is grayed out in zero span
Dependencies Unavailable in zero span.
Preset 500 ms
State Saved Saved in instrument state.
Min 2 ms
Max 100 s
Initial S/W Revision Prior to A.02.00
852 Remote Language Compatibility Measurement Application Reference