Agilent Technologies Signal Analyzer N9030a - Manual (Page 169)

3 Programming the Analyzer
STATus Subsystem
Questionable Power Enable
This command determines which bits in the Questionable Power Condition Register will set bits in
the Questionable Power Event register, which also sets the Power Summary bit (bit 3) in the
Questionable Register.
The variable is the sum of the decimal values of the bits you want to enable.
Mode All
Remote
Command :STATus:QUEStionable:POWer:ENABle
:STATus:QUEStionable:POWer:ENABle?
Example STAT:QUES:POW:ENAB 32
50 MHz Input Pwr too High for Cal will be reported to the Power Summary of the Status Questionable
register.
Preset 32767
Min 0
Max 32767
Status
Bits/OPC
dependencies Sequential command
Initial S/W
Revision Prior to A.02.00
Questionable Power Event Query
This query returns the decimal value of the sum of the bits in the Questionable Power Event
register.
The register requires that the associated PTR or NTR filters be set before a condition register bit can set a
bit in the event register. The data in this register is latched until it is queried. Once queried, the register is
cleared.
Mode All
Remote Command :STATus:QUEStionable:POWer[:EVENt]?
Example STAT:QUES:POW?
Preset 0
Status Bits/OPC dependencies Sequential command
Initial S/W Revision Prior to A.02.00
Remote Language Compatibility Measurement Application Reference 169