Agilent Technologies Signal Analyzer N9030a - Manual (Page 632)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
Input/Output
dBµV/m
Sets the antenna unit to dBµV/m. If this correction is turned on, and Apply Corrections is on, the
Y Axis Unit will then be forced to dBµV/m and all other Y Axis Unit selections will be grayed out.
Key Path Input/Output, Corrections, Properties, Antenna Unit
Example :CORR:CSET:ANT UVM
Readback "dBµV/m"
Initial S/W Revision A.02.00
dBµA/m
Sets the antenna unit to dBµA/m. If this correction is turned on, and Apply Corrections is on, the
Y Axis Unit will then be forced to dBµA/m and all other Y Axis Unit selections will be grayed out.
Key Path Input/Output, Corrections, Properties, Antenna Unit
Example :CORR:CSET:ANT UVA
Readback " dBµA/m"
Initial S/W Revision A.02.00
dBpT
Sets the antenna unit to dBpT. If this correction is turned on, and Apply Corrections is on, the Y
Axis Unit will then be forced to dBpT and all other Y Axis Unit selections will be grayed out.
Key Path Input/Output, Corrections, Properties, Antenna Unit
Example :CORR:CSET:ANT PTES
Readback "dBpT"
Initial S/W Revision A.02.00
dBG
Sets the antenna unit to dBG. If this correction is turned on, and Apply Corrections is on, the Y
Axis Unit will then be forced to dBG and all other Y Axis Unit selections will be grayed out.
Key Path Input/Output, Corrections, Properties, Antenna Unit
632 Remote Language Compatibility Measurement Application Reference