Agilent Technologies Signal Analyzer N9030a - Manual (Page 172)

3 Programming the Analyzer
STATus Subsystem
Mode All
Remote
Command :STATus:QUEStionable:TEMPerature:ENABle
:STATus:QUEStionable:TEMPerature:ENABle?
Example STAT:QUES:TEMP:ENAB 1
Reference Oscillator Oven Cold will be reported to the Temperature Summary of the Status Questionable
register.
Preset 32767
Min 0
Max 32767
Status
Bits/OPC
dependencies Sequential command
Initial S/W
Revision Prior to A.02.00
Questionable Temperature Event Query
This query returns the decimal value of the sum of the bits in the Questionable Temperature
Event register.
The register requires that the associated PTR or NTR filters be set before a condition register bit can set a
bit in the event register. The data in this register is latched until it is queried. Once queried, the register is
cleared
Mode All
Remote Command :STATus:QUEStionable:TEMPerature[:EVENt]?
Example STAT:QUES:TEMP?
Preset 0
Status Bits/OPC dependencies Sequential command
Initial S/W Revision Prior to A.02.00
Questionable Temperature Negative Transition
This command determines which bits in the Questionable Temperature Condition register will set
the corresponding bit in the Questionable Temperature Event register when the condition register
bit has a negative transition (1 to 0).
The variable is the sum of the decimal values of the bits that you want to enable.
172 Remote Language Compatibility Measurement Application Reference