Agilent Technologies Signal Analyzer N9030a - Manual (Page 1251)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
System
The Previous Page is grayed-out if the first page of information is presently displayed. The Next
Page menu key is grayed-out if the last page is information is presently displayed.
Key Path System, Show
Mode All
Example SYST:SHOW HARD
Initial S/W Revision Prior to A.02.00
LXI
This key shows you the product number, serial number, firmware revision, computer name, IP
address, Host ID, LXI Class, LXI Version, MAC Address, and the Auto-MDIX Capability.
Key Path System, Show
Initial S/W Revision Prior to A.02.00
Power On
Enables you to select how the instrument should power on. The options are: Mode and
Input/Output Defaults, User Preset and Last State.
Key Path System
Mode All
Remote Command :SYSTem:PON:TYPE MODE|USER|LAST
:SYSTem:PON:TYPE?
Example :SYST:PON:TYPE MODE
Preset This is unaffected by a Preset but is set to Mode on a “Restore System Defaults->All”
State Saved No
Backwards
Compatibility SCPI :SYSTem:PON:TYPE PRESet
the “PRESet” parameter is supported for backward compatibility only and behaves the same as
MODE.
Backwards Compatibility
Notes The Preset Type key in legacy analyzers has been removed, and the Power On toggle key has
been replaced by this 1-of-N key in the System menu.
Initial S/W Revision Prior to A.02.00
Remote Language Compatibility Measurement Application Reference 1251