Agilent Technologies Signal Analyzer N9030a - Manual (Page 722)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
Marker
the Y-axis result. Additional information is shown for markers which have marker functions
turned on.
Turning the Marker Table on turns the Peak Table off and vice versa.
Key Path Marker
Remote Command :CALCulate:MARKer:TABLe[:STATe] OFF|ON|0|1
:CALCulate:MARKer:TABLe[:STATe]?
Example CALC:MARK:TABL ON turns on the marker table.
Preset OFF
State Saved The on/off state of the Marker Table is saved in instrument state
Initial S/W Revision Prior to A.02.00
Marker Count
Accesses the marker count menu.
Key Path Marker
Readback line [On] if count on for the selected marker, [Off] if it is off.
Initial S/W Revision Prior to A.02.00
Counter
Turns the marker frequency counter on and off. The selected marker is counted, and if the
selected marker is a delta marker and its reference marker is not fixed, the reference marker is
counted as well.
See "Understanding the Marker Counter" on page 724 .
See "Query Count Value" on page 723 .
Key Path Marker, Marker Count
Remote Command :CALCulate:MARKer[1]|2|...12:FCOunt[:STATe] OFF|ON|0|1
:CALCulate:MARKer[1]|2|...12:FCOunt[:STATe]?
Example CALC:MARK2:FCO ON selects marker 2, turns it on, and turns on the counter
CALC:MARK2:FCO:X? returns the counted frequency.
722 Remote Language Compatibility Measurement Application Reference