Agilent Technologies Signal Analyzer N9030a User Manual

Page 812

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
Meas Setup

Amplitude

Lets you edit the Amplitude of the current row.

Key Path

Meas Setup, Limits, Edit

Notes

There is no value readback on the key

Min

–1000 dBm

Max

1000 dBm

Initial S/W Revision

A.02.00

Insert Point Below

Pressing this key inserts a point below the current point. The new point is a copy of the current
point. And becomes the current point The new point is not yet entered into the underlying table,
and the data in the row is displayed in light gray.

Key Path

Meas Setup, Limits, Edit

Initial S/W Revision

A.02.00

Delete Point

This is an immediate action key. It will immediately delete the currently-selected point, whether
or not that point is being edited, and select Navigate. The point following the currently-selected
point (or the point preceding if there is none) will be selected.

Key Path

Meas Setup, Limits, Edit

Initial S/W Revision

A.02.00

Copy from Limit

Copies an existing limit into the current limit, including all secondary parameters (Description,
Associated Trace, Type, Margin, Interpolation, Relative to CF/RL).

Key Path

Meas Setup, Limits, Edit

Remote Command

Example

:CALC:LLINE2:COPY LLINE1 copies the data from line 1 into line 2.

Notes

Auto return to the Edit menu.

Initial S/W Revision

A.02.00

812

Remote Language Compatibility Measurement Application Reference