Agilent Technologies Signal Analyzer N9030a - Manual (Page 538)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
AMPTD Y Scale
Key Path AMPTD Y Scale, Y Axis Unit
Dependencies Grayed out if no Amplitude Correction with an Antenna Unit is on.
Readback line Currently selected unit
Initial S/W Revision A.11.00
None
This is selected if no Antenna Unit is currently on, however you cannot actually set this value,
since it is always grayed out. The key is included simply to provide an indication on the
Readback line of the Antenna Unit key when there is no Antenna Unit selected.
Key Path AMPTD Y Scale, Y Axis Unit, Antenna Unit
Readback “None”
Initial S/W Revision A.11.00
dBµV/m
Sets the amplitude unit for the selected amplitude scale (log/lin) to dBµV/m. This is an antenna
unit, and this key is grayed out unless a Correction with this Antenna Unit selected is ON. If this
is the case, all of the other Antenna Units are grayed out.
Key Path AMPTD Y Scale, Y Axis Unit, Antenna Unit
Example UNIT:POW DBUVM
Dependencies Grayed out if no Amplitude Correction with an Antenna Unit is on.
Readback dBµV/m
Initial S/W Revision A.02.00
dBµA/m
Sets the amplitude unit for the selected amplitude scale (log/lin) to dBµA/m. This is an antenna
unit, and this key is grayed out unless a Correction with this Antenna Unit selected is ON. If this
is the case, all of the other Antenna Units are grayed out.
Key Path AMPTD Y Scale, Y Axis Unit, Antenna Unit
Example UNIT:POW DBUAM
538 Remote Language Compatibility Measurement Application Reference