Agilent Technologies Signal Analyzer N9030a - Manual (Page 193)

4 List of Legacy Analyzer Commands
Alphanumeric List of all Legacy Commands with N9061A Support
Command Description 8566 8568
8560
Series Description
MERGE Merge two traces No No N/A
MF Returns frequency of the
active marker Yes Yes Yes "MF (Marker Frequency Output)" on page 378
MIN Minimum No No No
MINH Min Hold N/A N/A Yes "MINH (Minimum Hold)" on page 379
MINPOS Returns the minimum
position in the trace Yes Yes N/A "MINPOS (Minimum X Position)" on page 380
MIRROR Mirror image of the trace No No N/A
MKA Amplitude of the active
marker Yes Yes Yes "MKA (Marker Amplitude)" on page 381
MKACT Specifies the active marker Yes Yes N/A "MKACT (Activate Marker)" on page 382
MKACTV Marker as the active
function N/A N/A N/A
MKBW Marker bandwidth N/A N/A Yes "MKBW (Marker Bandwidth)" on page 383
MKCF Moves the active marker to
center frequency Yes Yes Yes "MKCF (Marker to Center Frequency)" on
page 384
MKCHEDGE Marker to channel edge N/A N/A No
MKCONT Continues sweeping from
the marker after stop No No N/A
MKD Delta marker Yes Yes Yes "MKD (Marker Delta)" on page 385
MKDELCHBW Delta markers to channel
power bandwidth N/A N/A No
MKDLMODE Marker delta display line
mode N/A N/A N/A
MKDR Reciprocal of marker delta N/A N/A No
MKF Specifies the frequency of
the active marker Yes Yes Yes "MKF (Marker Frequency)" on page 387
MKFC Turns the marker
frequency counter on or off N/A Yes Yes "MKFC (Marker Counter)" on page 389
MKFCR Specifies the marker
frequency counter
resolution N/A Yes Yes "MKFCR (Marker Counter Resolution)" on
page 390
MKMCF Marker mean to center
frequency N/A N/A No
Remote Language Compatibility Measurement Application Reference 193