Brocade Network OS Command Reference v4.1.0 - Manual (Page 999)

Network OS Command Reference 961
53-1003115-01
show process memory
2
show process memory
Displays the memory usage information based on processes running in the system.
Synopsis show process memory [rbridge-id {rbridge-id | all}] [summary]
Operands rbridge-id Executes the command on the specified switches. Valid completions for
rbridge-id include the following:
rbridge-id Specifies the RBridge ID. This parameter is not valid in standalone mode,
and is supported only for the local RBridge ID.
all Specifies all switches in the fabric. This parameter is not supported.
summary Displays a summary view of memory usage.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to view memory usage information based on processes running in the system.
Usage Guidelines This command is supported only on the local switch.
Examples To show memory usage information by individual processes:
switch# show process memory
%Memory Used: 23.0904%; TotalMemory: 6191688 KB; Total Used: 1429688 KB
Total Free: 4762000 KB; Low Free: 868152 KB; High Free: 3034012 KB; Cached: 8067
24 KB
PID Process MEM% VSIZE(KB) RSS(KB) PSS(KB)
2462 Dcmd.Linux.powe 2.10 251084 130764 104557
2720 NosSmd.Linux.po 1.70 188892 109176 86360
2799 postgres 1.20 185296 80080 63286
3115 arpd 0.80 491404 49936 32129
2362 raslogd 0.60 193396 41748 20436
3099 nsm 0.60 189312 38064 20129
3105 rtmd 0.60 247220 37600 19709
2461 Ccmd.Linux.powe 0.50 140556 34192 17622
1273 confd 0.50 37688 31288 30101
3107 ssmd 0.50 238840 31128 13398
[output omitted, as will vary by device]
13847 BLADE_INTR_7 0.00 0 0 0
13848 BLADE_TMR_7 0.00 0 0 0
13849 module-241-th 0.00 0 0 0
13917 XMI_TX/207 0.00 0 0 0
13918 XMI_RX/207 0.00 0 0 0
13919 XMI_TX/247 0.00 0 0 0
13920 XMI_RX/247 0.00 0 0 0
See Also show process cpu, show process info