Brocade Network OS Command Reference v4.1.0 - Manual (Page 337)

Network OS Command Reference 299
53-1003115-01
firmware download logical-chassis
2
To reboot switches in a specific order, which can be done from any node:
switch# firmware download logical-chassis rbridge-id all path path.
firmware activate rbridge-id 2
firmware activate rbridge-id 3
firmware activate rbridge-id 4
firmware activate rbridge-id 1
To download firmware using the default-config option, use the following command:
sw0# firmware download logical-chassis default-config ftp host 10.1.2.30 user fvt
password brocade directory /dist/nos/4.0.0bld01 file release.plist rbridge-id
1,2-3
Rbridge-id Sanity Result Current Version
---------------------------------------------------
1 Disruptive 4.1.0
2 Disruptive 4.1.0
3 Disruptive 4.1.0
You are invoking firmware download with the provision option. This command will
download the new firmware to the specified nodes, default their configuration,
and reboot them automatically.
Do you want to continue? [y/n]: y
See Also firmware activate, firmware recover, show version, show firmwaredownloadstatus