Brocade Network OS Command Reference v4.1.0 - Manual (Page 833)

Network OS Command Reference 795
53-1003115-01
show fcoe map
2
show fcoe map
Displays all FCoE maps, or a single map.
Synopsis show fcoe map [default {rbridge-id rbridge-id} | rbridge-id rbridge-id]
Operands default The fabric map name. The only map name available is “default”.
rbridge-id rbridge-id Specifies an RBridge ID.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display all available FCoE maps, or a single designated map. However, for
Network OS v4.1.0, the only map name allowed is “default.”
Usage Guidelines This command is not available in standalone mode.
Examples
switch# show fcoe map default
================================================================
Name DCB-Map FABRIC-MAP(s)
================================================================
default default default
See Also None