Brocade Network OS Command Reference v4.1.0 - Manual (Page 1174)

1136 Network OS Command Reference
53-1003115-01
show running-config support
2
show running-config support
Displays the support parameters in the running configuration.
Synopsis show running-config support [ffdc]
Operands ffdc Displays the FFDC settings.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display the support parameters in the running configuration.
Usage Guidelines This command is supported only on the local switch.
This command is not supported on the standby management module.
Examples To display the support parameters in the running configuration:
switch# show running-config support ffdc
support ffdc
switch#
See Also telnet server shutdown, show support