Brocade Network OS Command Reference v4.1.0 - Manual (Page 1285)

Network OS Command Reference 1247
53-1003115-01
spanning-tree restricted-role
2
spanning-tree restricted-role
Restricts the role of the port from becoming a root port.
Synopsis spanning-tree restricted-role
no spanning-tree restricted-role
Operands None
Defaults The restricted role is disabled.
Command Modes Interface subtype configuration mode
Description Use this command to configure the port from becoming a root port.
Usage Guidelines If xSTP is enabled over VCS, this command must be executed on all the RBridges.
Enter no spanning-tree restricted-role to return to the default setting.
Examples To configure the port from becoming a root port:
switch(config)# interface tengigabitethernet 0/1
switch(conf-if-te-0/1)# spanning-tree restricted-role
See Also show spanning-tree