Brocade Network OS Command Reference v4.1.0 - Manual (Page 917)

Network OS Command Reference 879
53-1003115-01
show ip ospf interface
2
show ip ospf interface
Displays interface information.
Synopsis show ip ospf interface [{A.B.C.D | fortygigabitethernet rbridge-id/slot/port [brief]|
gigabitethernet rbridge-id/slot/port [brief] | loopback number | port-channel number [brief] |
tengigabitethernet rbridge-id/slot/port [brief] |ve vlan_id [brief]} [brief]] [[vrf vrfname [rbridge-id
{rbridge-id | all}]] | rbridge-id {rbridge-id | all}]
Operands A.B.C.D Specifies interface IP address in dotted decimal format.
fortygigabitethernet rbridge-id/slot/port
Specifies a valid 40-gigabit Ethernet port interface.
rbridge-id Specifies the RBridge ID. This parameter is not valid in standalone mode.
slot Specifies a valid slot number.
port Specifies a valid port number.
brief Displays brief summary information about the specified port.
gigabitethernet rbridge-id/slot/port
Specifies a valid 1-gigabit Ethernet interface
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
brief Displays brief summary information about the specified port.
loopback number Specifies a loopback port number in the range of 1 to 255.
port-channel number Specifies the interface is a port-channel. The number of available channels
range from 1 through 63 for standalone mode, and from 1 through 6144
for Brocade VCS Fabric mode. However, the channel can be assigned any
number from 1 through 6144.
brief Displays brief summary information about the specified port channel.
tengigabitethernet rbridge-id/slot/port
Specifies a valid 10-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
brief Displays brief summary information about the specified port.
ve vlan_id Specifies the VLAN number.
brief Displays brief summary information about the specified VLAN.
brief Displays brief summary about all enabled interfaces.
vrf vrfname Specifies the name of the VRF instance. If this option is not used, details
for the default VRF are shown in the output.
rbridge-id rbridge-id Displays the information for the physical, loopback, and SVI interfaces
specific to the selected RBridge.