Brocade Network OS Command Reference v4.1.0 - Manual (Page 1262)

1224 Network OS Command Reference
53-1003115-01
snmp-server contact
2
snmp-server contact
Sets the SNMP server contact string.
Synopsis snmp-server contact string
no snmp-server contact string
Operands string Specifies the server contact. You must enclose the text in double quotes if
the text contains spaces.
Defaults The default contact string is “Field Support.”
Command Modes Global configuration mode
Description Use this command to set the SNMP server contact string.
Usage Guidelines Enter no snmp-server contact string to restore the default values.
Examples To set the SNMP server contact string to “Operator 12345”:
switch(config)# snmp-server contact “Operator 12345”
To set the SNMP server contact string to the default of “Field Support”:
switch(config)# no snmp-server contact
See Also show running-config snmp-server, snmp-server community, snmp-server location,
snmp-server user, snmp-server v3host