Brocade Network OS Command Reference v4.1.0 - Manual (Page 731)

Network OS Command Reference 693
53-1003115-01
show ag pg
2
show ag pg
Displays information on Port Grouping (PG) configured on a switch for Access Gateway (AG) mode.
Synopsis show ag pg [rbridge-id {rbridge-id|all }]
Operands rbridge-id rbridge id Specifies an RBridge ID for the switch.
all Specifies all switches in the VCS cluster enabled for AG mode.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display information on N_Port groups configured on a switch. This
information includes N_Ports and VF_Ports in the group and Port Grouping (PG) modes enabled.
Usage Guidelines Access Gateway mode must be enabled.
Examples Following is an example showing port grouping information for RBridge 5:
sw0# show ag pg rbridge-id 5
Rbridge-ID 5:
-------------------------------------------------------------------------------------
PG_ID PG_Name PG_Mode N_Ports(Fi) VF_Ports
--------------------------------------------------------------------------------
0 pg0 lb 5/0/1,5/0/2,5/0/3,5/0/4, 1/5/1, 1/5/2, 1/5/3, 1/5/4,
5/0/5,5/0/6,5/0/7,5/0/8 1/5/5, 1/5/6, 1/5/7, 1/5/8,
1/5/9, 1/5/10, 1/5/11, 1/5/12,
1/5/13, 1/5/14, 1/5/15, 1/5/16,
1/5/17, 1/5/18, 1/5/19, 1/5/20,
1/5/21, 1/5/22, 1/5/23, 1/5/24,
1/5/25, 1/5/26, 1/5/27, 1/5/28,
1/5/29, 1/5/30, 1/5/31, 1/5/32,
1/5/33, 1/5/34, 1/5/35, 1/5/36,
1/5/37, 1/5/38, 1/5/39, 1/5/40,
1/5/41, 1/5/42, 1/5/43, 1/5/44,
1/5/45, 1/5/46, 1/5/47, 1/5/48,
1/5/49, 1/5/50, 1/5/51, 1/5/52,
1/5/53, 1/5/54, 1/5/55, 1/5/56,
1/5/57, 1/5/58, 1/5/59, 1/5/60,
1/5/61, 1/5/62, 1/5/63, 1/5/64
--------------------------------------------------------------------------------
See Also pg