Brocade Network OS Command Reference v4.1.0 - Manual (Page 732)

694 Network OS Command Reference
53-1003115-01
show arp
2
show arp
Displays the ARP cache.
Synopsis show arp [{switch_ID| all | dynamic | fortygigabitethernet rbridge-id/slot/port |
gigabitethernet rbridge-id/slot/port | ip ip-address | mac | slot | static | summary |
tengigabitethernet rbridge-id/slot/port |ve vlan_id | vrf name}]
Operands switch_ID Unique identifier for a switch (WWN).
all Displays ARP information for all RBridge IDs in a cluster.
dynamic Displays all the dynamic ARP entries in the ARP table.
fortygigabitethernet rbridge-id/slot/port
Specifies a valid 40-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
gigabitethernet rbridge-id/slot/port
Specifies a valid 1-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
ip Displays the ARP for a particular next-hop.
ip-address Displays the ARP information for this next-hop IP address.
mac Displays MAC-related ARP information.
slot Displays ARP information for a selected slot.
static Displays all the static ARP entries in the ARP table.
summary Displays a summary of the ARP table (can be used by itself, or succeed the
static, dynamic or interface keywords).
tengigabitethernet rbridge-id/slot/port
Specifies a valid external 10-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
ve vlan_id Specifies the virtual Ethernet (VE) interface to display. Refer to the Usage
Guidelines.
vrf name Specifies the name of the VRF instance. If this option is not used, details
for the default VRF are shown in the output.
Defaults None
Command Modes Privileged EXEC mode