Brocade Network OS Command Reference v4.1.0 - Manual (Page 635)

Network OS Command Reference 597
53-1003115-01
qos rcv-queue multicast threshold
2
qos rcv-queue multicast threshold
Configures a cap on the maximum queue depth for multicast packet expansion queues.
Synopsis qos rcv-queue multicast threshold mTC0 mTC1 mTC2 mTC3 mTC4 mTC5 mTC6 mTC7
no qos rcv-queue multicast threshold
Operands mTC0 Sets the Tail Drop Threshold for multicast Traffic Class 0 packet expansion
queue in units of packets (pkt). The valid range is 0 through 16383
packets.
mTC1 Sets the Tail Drop Threshold for multicast Traffic Class 1 packet expansion
queue in units of packets (pkt). The valid range is 0 through 16383
packets.
mTC2 Sets the Tail Drop Threshold for multicast Traffic Class 2 packet expansion
queue in units of packets (pkt). The valid range is 0 through 16383
packets.
mTC3 Sets the Tail Drop Threshold for multicast Traffic Class 3 packet expansion
queue in units of packets (pkt). The valid range is 0 through 16383
packets.
mTC4 Sets the Tail Drop Threshold for multicast Traffic Class 4 packet expansion
queue in units of packets (pkt). The valid range is 0 through 16383
packets.
mTC5 Sets the Tail Drop Threshold for multicast Traffic Class 5 packet expansion
queue in units of packets (pkt). The valid range is 0 through 16383
packets.
mTC6 Sets the Tail Drop Threshold for multicast Traffic Class 6 packet expansion
queue in units of packets (pkt). The valid range is 0 through 16383
packets.
mTC7 Sets the Tail Drop Threshold for multicast Traffic Class 7 packet expansion
queue in units of packets (pkt). The valid range is 0 through 16383
packets.
Defaults 64 packets for each multicast Traffic Class.
Command Modes Global configuration mode
Description Use this command to configure a cap on the maximum queue depth for multicast packet
expansion queues. The individual Tail Drop Threshold is specified for each of the four multicast
traffic classes. These Tail Drop Thresholds are applied uniformly across the entire system. These
queue depths are enforced independently by each switch.
Usage Guidelines This command is not supported on VDX 8770-4 and VDX 8770-8 switches.
Enter no qos rcv-queue multicast threshold to return the multicast expansion queues to the
default value.