Brocade Network OS Command Reference v4.1.0 - Manual (Page 752)

714 Network OS Command Reference
53-1003115-01
show debug dhcp packet
2
show debug dhcp packet
Displays the DHCP packet capture configuration for interfaces configured for DHCP packet
capturing.
Synopsis show debug dhcp packet
Operands None
Defaults None
Command Modes Privileged EXEC mode
Description Displays the DHCP packet capture configuration for each interface configured for DHCP packet
capture.
Usage Guidelines None
Examples
sw0# show debug dhcp packet
% DHCP protocol RCV debug is enabled on interface Te 3/18
% DHCP protocol TX debug is enabled on interface Te 3/18
PCAP Buffer Configuration for Vrf ID 0: Buffer Type is Linear and BufferSize is
2056
See Also debug dhcp packet buffer interface