Brocade Network OS Command Reference v4.1.0 - Manual (Page 110)

72 Network OS Command Reference
53-1003115-01
chassis beacon
2
chassis beacon
Controls the flashing LED beacon on the switch.
Synopsis chassis beacon {enable | disable}
Operands enable Enables the chassis beacon LED.
disable Disables the chassis beacon LED.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to toggle the flashing LED locator on the switch. This makes finding the desired
switch easier in large data centers.
Usage Guidelines None
Examples To enable the chassis beacon:
switch# chassis beacon enable
Chassis Beacon has been enabled
To disable the chassis beacon:
switch# chassis beacon disable
Chassis Beacon has been disabled
See Also None