Brocade Network OS Command Reference v4.1.0 User Manual

Page 900

862

Network OS Command Reference

53-1003115-01

show ip igmp interface

port-channel number

Specifies the interface is a port-channel. The number of available channels
range from 1 through 63 for standalone mode, and from 1 through 6144
for Brocade VCS Fabric mode. However, the channel can be assigned any
number from 1 through 6144.

detail

Displays the IGMPv3 source information.

Defaults

None

Command Modes

Privileged EXEC mode

Description

Use this command to display information related to VLANs in the IGMP protocol module.

Usage Guidelines

On the Brocade VDX family of switches, VLANs are treated as interfaces from a configuration point
of view. By default, all the DCB ports are assigned to VLAN 1 (VLAN ID equals 1). Valid VLAN IDs
are as follows:

•

On Brocade VDX 8770 switches: 1 through 4086 for 802.1Q VLANs (VLAN IDs 4087
through 4095 are reserved on these switches), and 4096 through 8191 for service or
transport VFs in a Virtual Fabrics context.

•

On all other Brocade VDX switches: 1 through 3962 for 802.1Q VLANs (VLAN IDs 3963
through 4095 are reserved on these switches, and 4096 through 8191 for service or
transport VFs in a Virtual Fabrics context.

In logical chassis mode:

•

When the rbridge-id option is specified, details for the VE interface on that particular rbridge
are displayed.

•

If rbridge-id is not specified, details for the VE interface on the node on which the command is
executed is displayed.

•

When rbridge-id all is specified, all VE interfaces with that rbridge-id from all the nodes in the
cluster are displayed.

Examples

switch# show ip igmp interface vlan 1

Interface Vlan 1

IGMP Snooping disabled

IGMP Snooping fast-leave disabled

IGMP Snooping querier disabled

Number of router-ports: 0