Brocade Network OS Command Reference v4.1.0 - Manual (Page 1122)

1084 Network OS Command Reference
53-1003115-01
show running-config ip route
2
show running-config ip route
Displays routing information.
Synopsis show running-config ip route [next-hop | next-hop-enable-default | next-hop-recursion |
routing-table]
Operands next-hop Displays the routing protocol configured for resolving the next hop.
next-hop-enable-default
Specifies enabling of next hop resolution to default.
next-hop-recursion Specifies next hop recursion.
routing-table Displays a specific route to a specific destination.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display routing information.
Usage Guidelines None
Examples None
See Also None