Brocade Network OS Command Reference v4.1.0 - Manual (Page 884)

846 Network OS Command Reference
53-1003115-01
show ip bgp routes community-access-list
2
show ip bgp routes community-access-list
Displays BGP4 route information for an AS-path community access list.
Synopsis show ip bgp routes community-access-list name [rbridge-id rbridge-id]
Operands name Name of the AS path community access list. Range is from 1 through 32
ASCII characters.
rbridge-id Enables RBridge ID mode to support Virtual Cluster Switching (VCS) on
individual nodes.
rbridge-id Specifies a unique identifier for a node.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to view BGP4 route information for an AS-path community access list.
Usage Guidelines None
Examples To view BGP4 route information for an AS-path community access list:
switch# show ip bgp routes community-access-list mycommunityacl
See Also None