Brocade Network OS Command Reference v4.1.0 - Manual (Page 599)

Network OS Command Reference 561
53-1003115-01
private-vlan association
2
private-vlan association
Associates a secondary VLAN to a primary VLAN.
Synopsis private-vlan association [add vlan_id | remove vlan_id]
no private-vlan association [add vlan_id | remove vlan_id]
Operands add vlan_id Adds the association.
remove vlan_id Removes the association.
Defaults None
Command Modes Interface subtype configuration mode
Description Use this command to associates a secondary VLAN to a primary VLAN.
Usage Guidelines On the Brocade VDX family of hardware, VLANs are treated as interfaces from a configuration point
of view. By default, all the DCB ports are assigned to VLAN 1 (VLAN ID equals 1). Valid VLAN IDs are
as follows:
• On Brocade VDX 8770 switches: 1 through 4086 for 802.1Q VLANs (VLAN IDs 4087 through
4095 are reserved on these switches), and 4096 through 8191 for service or transport VFs in
a Virtual Fabrics context.
• On all other Brocade VDX switches: 1 through 3962 for 802.1Q VLANs (VLAN IDs 3963
through 4095 are reserved on these switches), and 4096 through 8191 for service or
transport VFs in a Virtual Fabrics context.
Examples None
See Also private-vlan