Brocade Network OS Command Reference v4.1.0 - Manual (Page 871)

Network OS Command Reference 833
53-1003115-01
show ip bgp neighbor
2
show ip bgp neighbor
Displays configuration information and statistics for BGP4 neighbors of the device.
Synopsis show ip bgp neighbor ip-addr [rbridge-id rbridge-id]
Operands ip-addr IPv4 address of the neighbor in dotted-decimal notation.
rbridge-id Enables RBridge ID mode to support Virtual Cluster Switching (VCS) on
individual nodes.
rbridge-id Specifies a unique identifier for a node.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to view configuration information and statistics for BGP4 neighbors of the
device. Output shows all configured parameters for the neighbors. Only the parameters whose
values differ from defaults are shown.
Usage Guidelines None
Examples
switch# show ip bgp neighbor 10.11.12.13
See Also None