Brocade Network OS Command Reference v4.1.0 - Manual (Page 1109)

Network OS Command Reference 1071
53-1003115-01
show running-config interface tengigabitethernet qos
2
show running-config interface tengigabitethernet qos
Displays the quality of service (QoS) configured for a 10-gigabit Ethernet interface.
Synopsis show running-config interface tengigabitethernet [rbridge-id/slot/port] qos [cos | cos-mutation |
cos-traffic-class | flowcontrol [rx | tx] | trust [cos]]
Operands rbridge-id Specifies a switch by its RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
cos Displays only the Class of Service (CoS) value configured for the interface.
cos-mutation Displays the Cos-to-CoS mutation QoS map configured for the interface.
cos-traffic-class Displays the CoS-to-Traffic Class QoS Map configured for the interface.
flowcontrol Displays the activation status of QoS flow control on the interface.
rx Displays the activation status of the receive portion of flow control for the
interface.
tx Displays the activation status of the transmit portion of flow control for the
interface.
trust cos Displays the configured QoS trust mode for the interface.
Defaults Displays the full QoS configuration for the interface.
Command Modes Privileged EXEC mode
Description Use this command to display the QoS configuration for the specified 10-gigabit Ethernet interface.
Usage Guidelines None
Examples None
See Also qos cos, qos cos-mutation, qos cos-traffic-class, qos flowcontrol tx, qos trust cos,
show qos flowcontrol interface, show qos interface, show qos queue interface,
show qos rcv-queue interface