Brocade Network OS Command Reference v4.1.0 - Manual (Page 1091)

Network OS Command Reference 1053
53-1003115-01
show running-config interface gigabitethernet vlan
2
show running-config interface gigabitethernet vlan
Displays information about VLAN classification groups for the 1-gigabit Ethernet Layer 2 interface.
Synopsis show running-config interface gigabitethernet [rbridge-id/slot/port]
vlan [classifier [activate [group]]]
Operands rbridge-id Specifies a switch by its RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
classifier Displays VLAN classifier commands for the Layer 2 interface.
activate Displays VLAN classifier activate commands for the Layer 2 interface.
group Displays VLAN classifier activate group commands for the Layer 2 interface.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display VLAN classifier commands executed for the port.
Usage Guidelines This command can be used only on Brocade VDX 6710, Brocade VDX 8770-4, and
Brocade VDX 8770-8 switches.
Examples
switch# show running-config interface gigabitethernet 1/0/8 vlan
interface Gigabit Ethernet 1/0/8
vlan classifier activate group 1 vlan 2
See Also show vlan classifier, switchport, vlan classifier activate group, vlan classifier group,
vlan classifier rule