Brocade Network OS Command Reference v4.1.0 - Manual (Page 734)

696 Network OS Command Reference
53-1003115-01
show bpdu-drop
2
show bpdu-drop
Displays information about BPDU guard.
Synopsis show bpdu-drop [interface {port-channel num| fortygigabitethernet rbridge-id/slot/port |
gigabitethernet rbridge-id/slot/port | tengigabitethernet rbridge-id/slot/port]
Operands interface Selects an interface (required).
port-channel num Selects a port channel interface. The number of available channels range
from 1 through 63 for standalone mode, and from 1 through 6144 for
Brocade VCS Fabric mode. However, the channel can be assigned any
number from 1 through 6144.
fortygigabitethernet Selects a 40-GbE interface.
gigabitethernet Selects a 1-GbE interface.
tengigabitethernet Selects a 10-GbE interface.
rbridge-id/slot/port
Selects the RBridge ID, slot, and port of the respective interface.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display information about BPDU Guard.
Usage Guidelines This command is supported in VCS and standalone mode. This command can be entered on any
RBridge in a Brocade VCS Fabric.
Examples None
See Also capture packet interface