Brocade Network OS Command Reference v4.1.0 - Manual (Page 70)

32 Network OS Command Reference
53-1003115-01
ag enable
2
ag enable
Enables Access Gateway mode on a switch.
Synopsis ag [rbridge-id rbridge id vcs-id vcs-id] enable
no ag enable
Operands rbridge-id rbridge-id Specifies the RBridge identifier for the switch.
vcs-id vcs-id Specifies the VCS identifier for the switch.
Defaults AG mode is disabled.
Command Modes Privileged EXEC mode
Description Use this command to enable or disable Access Gateway mode on the switch. Enabling AG mode
enables VDX 6730 switch FC ports, configures them as N_Ports, and then and maps these
N_Ports to VF_Ports using a default mapping configuration based on the switch platform. Enabling
Access Gateway mode reboots the switch.
Usage Guidelines Enter the ag enable command to enable Access Gateway mode on a switch that is in VCS mode.
Enter the ag rbridge-id rbridge id vcs-id vcs-id enable command to enable VCS mode and Access
Gateway mode on a standalone switch.
Enter the no ag enable command to disable Access Gateway mode.
The switch must be in VCS mode to enable Access Gateway.
Examples The following example enables AG mode on a local switch:
switch# ag enable
The following example enables AG mode on a specific switch using the Rbridge ID and VCS ID:
switch# ag rbridge-id 1 vcs-id 2000 enable
The following example disables AG mode on a local switch:
switch# no ag enable
See Also show ag