Match (route map) – Brocade Network OS Command Reference v4.1.0 User Manual
Page 492
454
Network OS Command Reference
53-1003115-01
match (route map)
2
match (route map)
Defines a variety of match conditions for a route map.
Synopsis
match {[as-path name] | [community acl exact-match] | [ip address acl | prefix-list string] |
[ip route-source acl | prefix name] | [metric num] | [next-hop address-filter-list] | [route-type
[internal | external-type1 | external-type2]] | [level-1 | level-2 | level-1-2] [tag tag-value] |
interface interface interface interface . . . interface | [protocol bgp static-network | protocol bgp
external | protocol bgp internal]} {ip address acl acl-name}
no match
no match {ip address acl acl-name}
Operands
as-path
Specifies an AS-path ACL that is configured by the ip as-path access-list
command.
name
Name of the ACL.
community acl exact-match
Matches a route if and only if the route community attributes field contains
the same community numbers specified in the match statement.
ip address
Specifies an IP ACL or prefix list.
acl
ACL that is configured by the ip as-path access-list command.
prefix-list
Specifies an IP prefix list.
string
Name of the prefix list.
ip route-source
Specifies an IP route source ACL or prefix list.
acl
ACL that is configured by the ip as-path access-list command.
prefix
IP prefix.
name
Name of the prefix.
metric
Compares the route MED (metric) to the value specified by num.
num
BGP4 route metric.
next-hop
Compares the IPv4 address of the route next hop to the specified IP
address filters. The filters must be already configured by means of the
distribute-list command.
address-filter-list Number of the address filter list configured by means of the neighbor
distribute-list command.
route-type
Compares a route type to a specified value. Applies to OSPF routes only.
internal
Specifies an internal route.
external-type1
Specifies an External Type 1 route.
external-type2
Specifies an External Type 2 route.
level-1
Compares IS-IS routes only with routes in the same area.
level-2
Compares IS-IS routes only with routes in different areas, but within a
domain.