Fcoe-enodes – Brocade Network OS Command Reference v4.1.0 User Manual

Page 316

278

Network OS Command Reference

53-1003115-01

fcoe-enodes

Sets the number of FCoE ENodes that are to be created on a switch.

Synopsis

fcoe-enodes number

no fcoe-enodes

Operands

number

The number of FCoE interfaces. The range is from 0 through 1000.

Defaults

The default value is 64.

Command Modes

RBridge ID configuration mode, fabric map configuration mode

Description

Use this command to set the number of FCoE ENodes that are to be created on a switch.

Usage Guidelines

This command replaces the max-enodes command.

If the user tries to configure the number of FCoE interfaces with the above command, an error is
thrown as in the following example:

switch(config)# fcoe

switch(config-fcoe)# fabric-map default

switch(config-fcoe-fabric-map)# max-enodes 500

%Error: This command is not allowed to configure max enodes. Please use

fcoe-enodes under rbridge mode.

This feature requires an FCoE license. If that license is not present, the number of FCoE ENodes
created is 0. When that license is removed, it is recommended that the switch be rebooted. The
number of FCoE ENodes created is set to 0 and all interfaces are deleted.

Examples

To set the number of FCoE ENodes to be created to 67:

switch(config)# rbridge-id 10

sw0(config-rbridge-id-10)# fcoe

sw0(config-rbridge-fcoe)# fabric-map default

sw0(config-rbridge-fcoe-fabric-map)# fcoe-enodes 67

2013/08/16-09:59:11, [FCOE-1035], 9267, DCE, INFO, sw0, Virtual FCoE port 1/19/65

is online.

2013/08/16-09:59:11, [FCOE-1035], 9268, DCE, INFO, sw0, Virtual FCoE port 1/19/66

is online.

2013/08/16-09:59:11, [FCOE-1035], 9269, DCE, INFO, sw0, Virtual FCoE port 1/19/67

is online.

sw0(config-rbridge-id-19-fcoe-fabric-map)#