Brocade Network OS Command Reference v4.1.0 - Manual (Page 207)

Network OS Command Reference 169
53-1003115-01
counter reliability
2
counter reliability
Sets and displays the reliability counter for the Access Gateway N_Port Monitoring feature.
Synopsis counter reliability value
Operands value A value from 10 through 100 static change notifications (SCNs) per
5-minute period.
Defaults 25 SCNs per 5-minute period.
Command Modes Access Gateway (AG) configuration
Description This command is used for the Access Gateway N_Port monitoring feature. The command sets and
displays the reliability count of online and offline SCNs counted during a 5-minute period before
the link between an N_Port on a VDX switch in Access mode and an F_Port on an FC fabric is
considered unreliable.
Usage Guidelines Use this command while in Access Gateway (AG) mode for a specific RBridge ID. Entering the
counter reliability command without a value displays the current counter setting. You can set a
value from 10 through 100 SCNs per 5-minute period.
Examples Set the reliability counter value.
sw0(config-rbridge-id-3-ag)# counter reliability 50
Displays the current reliability counter value.
sw0(config-rbridge-id-3-ag)# counter reliability
See Also None