Brocade Network OS Command Reference v4.1.0 - Manual (Page 101)

Network OS Command Reference 63
53-1003115-01
cee-map (FCoE)
2
cee-map (FCoE)
Assigns a cee-map to the FCoE Fabric-Map.
Synopsis cee-map default
no cee-map default
Operands None
Defaults The only map name allowed is “default.”
Command Modes FCoE map configuration mode
Description Use this command to assign a cee-map to the FCoE fabric-map.
Usage Guidelines You must be in the feature configuration mode for FCoE map for this command to function.
Enter no cee-map to revert to the default values for the map.
Examples
switch(config)# fcoe
switch(config-fcoe)# map default
switch(config-fcoe-map)# cee-map default
See Also fabric-map, fcoe