Brocade Network OS Command Reference v4.1.0 - Manual (Page 926)

888 Network OS Command Reference
53-1003115-01
show ip ospf virtual
2
show ip ospf virtual
Displays information about virtual links.
Synopsis show ip ospf virtual {link | neighbor} [index] [[vrf vrfname [rbridge-id {rbridge-id | all}]] | rbridge-id
{rbridge-id | all}]
Operands link index Shows information about all virtual links or one virtual link that you specify.
neighbor index Shows information about all virtual neighbors or one virtual neighbor that
you specify.
vrf vrfname Specifies the name of the VRF instance. If this option is not used, details
for the default VRF are shown in the output.
rbridge-id rbridge-id Displays the information for the physical, loopback, and SVI interfaces
specific to the selected RBridge.
all Displays the information for the physical, loopback, and SVI interfaces of all
nodes in the VCS cluster. There can be multiple loopbacks and SVIs with
the same RBridge ID from different nodes.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display information about virtual links and virtual neighbors over virtual
links. You can show information about all virtual links or virtual neighbors, or you can specify a
specific virtual link or virtual neighbor.
Usage Guidelines None
Examples To show information about all virtual links:
switch# show ip ospf virtual link
Indx Transit Area Router ID Transit(sec) Retrans(sec) Hello(sec)
1 7 192.0.0.1 1 5 10
Dead(sec) events state Authentication-Key
40 0 down None
MD5 Authentication-Key: None
MD5 Authentication-Key-Id: None
MD5 Authentication-Key-Activation-Wait-Time: 300
To show information about all virtual neighbors:
switch# show ip ospf virtual neighbor
Indx Transit Area Router ID Transit(sec) Retrans(sec) Hello(sec)
1 7 192.0.0.1 1 5 10
Dead(sec) events state Authentication-Key
40 0 down None
MD5 Authentication-Key: None
MD5 Authentication-Key-Id: None
MD5 Authentication-Key-Activation-Wait-Time: 300
See Also None