Brocade Network OS Command Reference v4.1.0 - Manual (Page 1075)

Network OS Command Reference 1037
53-1003115-01
show running-config interface gigabitethernet channel-group
2
show running-config interface
gigabitethernet channel-group
Displays channel group configuration information for an interface participating in link aggregation.
Synopsis show running-config interface gigabitethernet [rbridge-id/slot/port] channel-group [mode | type]
Operands rbridge-id Specifies a switch by its RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
mode Displays the mode of link aggregation (active, passive, or on).
type Displays the type of link aggregation (802.3ad standards-based LAG, or
Brocade proprietary hardware-based trunking).
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display information about the channel group configuration of the specified
Ethernet interface.
Usage Guidelines This command is relevant only to interfaces configured as part of a LAG.
This command can be used only on Brocade VDX 6710, Brocade VDX 8770-4, and
Brocade VDX 8770-8 switches.
Examples None
See Also channel-group