Brocade Network OS Command Reference v4.1.0 - Manual (Page 1293)

Network OS Command Reference 1255
53-1003115-01
spt-threshold
2
spt-threshold
Configures the Shortest Path Tree (SPT) threshold.
Synopsis spt-threshold {infinity | num}
no spt-threshold
Operands infinity Use only the rendezvous point to send packets, do not switch over to SPT.
num Rate (in kilobytes per second) that must be reached before switching to SPT.
Valid values range from 1 through 4294967295.
Defaults Default value is 1.
Command Modes PIM router configuration mode
Description Use this command to specify the rate, in kilobytes per second, data is to be sent through the
rendezvous point before switching to SPT for sending packets.
Usage Guidelines Enter no spt-threshold to return to the default setting of 1.
Examples To set the SPT threshold interval to 20:
switch(conf-pim-router)# spt-threshold 20
See Also router pim