Brocade Network OS Command Reference v4.1.0 - Manual (Page 269)

Network OS Command Reference 231
53-1003115-01
distance (BGP)
2
distance (BGP)
Changes the default administrative distances for EBGP, IBGP, and local BGP4.
Synopsis distance external-distance internal-distance local-distance
no distance
Operands external-distance EBGP distance. Range is from 1 through 255.
internal-distance IBGP distance. Range is from 1 through 255.
local-distance Local BGP4 distance. Range is from 1 through 255.
Defaults None
Command Modes BGP configuration mode
Description To select one route over another according to the source of the route information, the device can
use the administrative distances assigned to the sources. The administrative distance is a
protocol-independent metric that IP devices use to compare routes from different sources. Lower
administrative distances are preferred over higher ones. Use this command to change the default
administrative distances for EBGP, IBGP, and local BGP4.
Usage Guidelines Enter values in the order corresponding to the values in Operands.
Use the no form of this command to restore the defaults.
Examples To configure the device to change the administrative distance:
switch(config)# rbridge-id 10
switch(config-rbridge-id-10)# router bgp
switch(config-bgp-router)# distance 100 150 200
See Also None