Show fabric ecmp load-balance – Brocade Network OS Command Reference v4.1.0 User Manual

Page 795

Network OS Command Reference

757

53-1003115-01

show fabric ecmp load-balance

Displays the current configuration of hash field selection and hash swap.

Synopsis

show fabric ecmp load-balance [rbridge-id value]

Operands

rbridge-id value

Specifies the RBridge ID

Defaults

None

Command Modes

Privileged EXEC mode

Description

Use this command to display the current configuration of hash field selection and hash swap.

Usage Guidelines

The show fabric family of commands display neighbor and local port information when connected
to a down-level RBridge.

This command displays ISL details, including the breakout index of the interface if breakout mode
is configured on the source or neighbor interface.

Examples

Some typical outputs of this command:

switch# show fabric ecmp load-balance

Fabric Ecmp Load Balance Information

------------------------------------

Rbridge-Id

: 2

Ecmp-Load-Balance Flavor

: Destination MAC address and VID based load

balancing

Ecmp-Load-Balance HashSwap

: 0x4

switch# show fabric ecmp load-balance rbridge-id 2