Brocade Network OS Command Reference v4.1.0 - Manual (Page 83)

Network OS Command Reference 45
53-1003115-01
as-path-ignore (BGP)
2
as-path-ignore (BGP)
Disables the comparison of the autonomous system (AS) path lengths of otherwise equal paths.
Synopsis as-path-ignore
no as-path-ignore
Operands None
Defaults This feature is disabled.
Command Modes BGP configuration mode
Description Use this command to disable the comparison of the AS path lengths of otherwise equal paths.
Usage Guidelines Use the no form of this command to restore the default.
Examples To configure the device always to disable the comparison of AS path lengths:
switch(config)# rbridge-id 10
switch(config-rbridge-id-10)# router bgp
switch(config-bgp-router)# as-path-ignore
See Also None